How to remove rust from stainless steel in homes

 

Sometimes rust cannot be avoided even in stainless steel items at home. Knowing how to remove it is not only important to get rid of its unsightly marks but also to prevent the stainless steel from facing any subsequent damage. Therefore, the determination to carry out the rust removal process will ensure that the problem does not get worse. - First step:  Inspection Perform a comprehensive examination of the piece of stainless steel that was affected by a rust spot, to look for any other spots of corrosion that could form. If you have noticed the presence of If there is a rust spot in a specific spot, there may be others in other places. When handling a piece of furniture containing stainless steel, carefully turn it over and inspect the bottom and opposite surfaces. If you want to know how to remove rust, you must estimate the severity of the rust stains that you can determine by detecting them. - The second step:  Dealing with small rust stains It is easier to get rid of small or recent rust stains. You can use fine sandpaper to scrub the rust stain and continue to check the condition when you determine that what you are doing is working. Follow this by mixing a solution of baking soda and water. Then spray the solution onto the stain, and rub it with a clean rag to remove any remaining traces of rust before wiping it with another clean, dry rag. If this method is not effective, spread a little bicarbonate of soda on the rust stain and rub the surface with a rag moistened with white vinegar. It is always preferable to use white vinegar on other stains so that the smell is not strong. - Step Three:  Taking care of larger and more severe rust stains The more As the rust spread and became more deeply embedded in the stainless steel, it was more difficult to remove and required more time. First, the rust stain was scrubbed with an abrasive brush or loofah to remove any residue. Spray the rust stains with a solution of soda granules before covering them with a layer of tomato ketchup. The ingredients in tomato ketchup are ideal for getting rid of rust. - Leave the material in place for half an hour before wiping it with a cloth dampened with water. - Make sure to remove any water residue with a dry cloth. And do not leave any wet spot that will pave the way for the formation of new rust spots. - For stubborn stains: Spread a little lemon juice on the spot and leave it for at least half an hour, and follow the same previous steps to wipe it and dry it. - Step Four:  Finish After removing the rust You should know how to reduce the chance of rust stains forming again. Depending on the polished outer layer of stainless steel, you should be able to complete the repair process by covering the stains with paint or wax suitable for stainless steel uses.  Choose one of them and paint the surface of the stain directly as a permanent solution to the damage. Rust.